- Browse Categories
- Mechanical measurement device
- PJK Brand Monitoring System
- Optical Survey Instruments
- RTK GNSS Systems
- Pipeline Detector/ Locator & GPR
- Unmanned Aerial Vehicle Payload
- Thermal Camera
- 3D Laser Scanner
- Wet Blast Machine
- Measuring instrument Plainmeter
- Weather Station Series
- SDI Soil Tester
- UAV/ Unmanned Aerial Vehicle
- Module
- Viscometer
- Electric Hygro-thermograph
- Spectrometer
- Echo Sounder
- Processing Software
- Keson Measuring Tools
Special features
Measurement by 6-digit pulse count
This N-Series can measure the area by pulse count of 6-digits.This method enables a larger cumulative measurement of area ( Up to10㎡).
Maximum cumulative measurement value of 10㎡
With the measurement by 6-digit pulse count, the N-Series Planimeter can measure a larger area by 100 times than ordinary Planimeter. The conventional planimeter has a maximum cumulative area to measure only 0.1 ㎡.lf measurement value shows over 0.1㎡ when measuring, the display is to be reset to "0".This requires to register the numbers of how many times these resettings are occurred,
With the New PLACOM N-Series,there is no need of these troublesome procedures.
Easy conversion function of unit and scale
KP-9ON and KP-80N can convert easily the measured area value into a new area value in a newly desired unit and with a newly desired scale value. KP-92N and KP-82N can convert the unit between in2 and cm2
Hold memory function
In cumulative measurement, this Hold Memory function is effectively used.If an error occurs in measuring, press C/AC key.Then last measuredvalue is appeared by pulse count. Since previous measured values before error are stored, there is no need to another measurements from the beginning.
Automatic shifting of unit to upper unit
When the measured area value overflows the displayed figures of 8digits, the measured area value is calculated and displayed by anupper unit. When the overflows is occurred in the uppermost unit, km?.acre, the measurement can be continued by pulse count display.
Average value measurement
In order to get better result of measurement, Mean value measurement is recommended. This measurement can be easily done on this N-Series.
Measurement of an area with different lateral and longitudinal scale.
Auto-power-off function for energy saving
Applications
- Construction and civil engineering
- Land developing planning
- Machine designing
- Data analysis in statistics
- Architecture and interior designing
- Forestry area
- Ship designing
- Medical research
- Agriculture
Specifications of PLACOM N-Series
| Model | KP-90N |
| Type | Rpler Type with Computing Function |
| Display | Liquid Crystal, 8-digit Figures |
| Symbol | Batt-E, SCALE MEMO, HOLD cm2, m2, km2, in2, ft2, acre, etc. |
| Converting Function | Unit and Scale value |
|
Accumulated Measuring Value |
Maximum 10 m2 ( scale 1:1 ) |
| Measuring Range |
Maximum vertical width: 325 mm Horizntal roller rotating length: 30m |
| Accuracy | Within ±0.2%( within 2/1,000 pulses） |
| Power Supply |
Built-in NiCd Battery ( rechargeable through AC Adapter) AC Adapter 100V~240V(Auto-power-off function is provided.) |
| Operating Duration | Approx.30 hours of continuous operation |
| Battery Charging Time | Approx. 15 hours |
| Main Unit Weight | 750g |
Tel:+8613828792860
Wechat:PJK13828792860
Contact Person:Janet luo
PDF Show:PDF
- Other Products
